Installing a security system is one of the best things you can do for your commercial space. Because a commercial establishment is often bigger than a residential space and also involves a lot more people on a daily basis the need for security is always greater.
There are various stellar security system services such as CES complete that provide top quality, salient, and easy to maintain systems for all types of commercial spaces.
Regardless of whether your establishment is small or large, you must never neglect installing a security system including a fire system, intrusion detector, access control, and burglar alarm.
But the problem with security systems is that there is no way to know if they work all right until there is danger. Therefore, you should test your security alarm system on a weekly or monthly basis this provides you with insurance that the system will work when needed.
Many people have no idea how to test commercial security system here discuss the steps involved in testing your alarm system:
The first step that you need to follow is to contact your local central station and ask them to put your security system in test mode.
This mode makes the alarm system work just like it would during actual danger, and lets you know what to expect from the system when the time comes. The system should be put to test mode by providing the operator with your name, address, and password.
Once your identity is verified, you should tell the operator that you would like to put your system in test mode. The test mode lasts around 8 hours or until you request it to stop.
When the system is in test mode, make sure all the doors and windows are shut, and the system is in the Ready to Arm state.
You must arm the system as if you were leaving the property. Once the system is armed, you can either open a door or window or simply stand in front of the motion detector to activate the alarm.
Let the alarm sound for at least a minute before disarming it. This will help you know that the alarm is working properly. Once you have silenced the system and reset it, you have to contact the operator to verify the signals.
Keep in mind that while in test mode, the signals from the security system will only be logged but no action taken until the test ends.
CES Complete recommends that you test your system at least once a month. If you cannot do it on your own, CES Complete can have a technician come over to perform the check for you.